Atlas BNA File Description
The Atlas boundary file .BNA is an ASCII format file used to store geographic information including areas, curves, ellipses, points, and IDs.
The general format of the file is:
"Pname 1", "Sname 1", type/length
x1,y1
x2,y2
...
xn,yn
"Pname 2", "Sname 2", type/length
x1,y1
x2,y2
...
xn,yn
Pname
Pname is the name of the primary ID. The primary ID is used to link the object to external data.
Sname
Sname is the name of the secondary ID. The secondary ID is optional.
Type/Length
The type/length is an integer which identifies the object as an area, curve, ellipse or point.
Following the type/length are the actual X,Y coordinate pairs that make up the object. These can be integers or real numbers, and are stored 1 pair per line.
The type/length field indicates the number of coordinate pairs to follow and also indicates the type of object as follows:
- Areas have a type/length value greater than 2. The value indicates the number of coordinate pairs to follow. Islands and lakes are concatenated to the coordinate list.
- Curves have a type/length value less than -1. The absolute value is the number of coordinates to follow for the curve.
- Ellipses have a type/length value 2. The first pair of coordinates describe the center of the ellipse. The major and minor radii are stored in the second pair of coordinates. If the minor radius is 0, the ellipse is a circle.
- If the type/length field is 1, the object is considered a point. One coordinate pair follows.
Simple and Compound Areas
Two kinds of areas exist, simple and compound. A simple area contains a starting point, a series of points specifying the area's boundary and a closing point with the same coordinate as the starting point. A compound area contains one or more subareas, such as islands or lakes. Atlas Boundary files use a special technique to specify the subareas comprising compound areas.
Example 1
A simple area with 5 points is shown in the Atlas Boundary file format:
"name" "attrib" 6
2.15, 3.25
3.75, 5.15
6.5, 4.3
5.5, 1.7
4.25, 3.4
2.15, 3.25
Example 2
A compound area consisting of a closed outer area and two islands. Here is how the coordinates should be specified in an Atlas Boundary file:
| AX1,AY1 | Starting point of area "A" | |
| AX2,AY2 | Points specifying boundary of area "A" | |
| . | ||
| . | ||
| AXn,AYn | Ending point of area "A" | |
| BX1,BY1 | Starting point of subarea "B" | |
| BX2,BY2 | Points specifying boundary of subarea "B" | |
| . | ||
| . | ||
| BXn,BYn | Ending point of subarea "B" | |
| AX1,AY1 | Starting point of area "A" (Flag Point) | |
| CX1,CY1 | Starting point of subarea "C" | |
| CX1,CY1 | Starting point of subarea "C" | |
| CX2,CY2 | Points specifying boundary of subarea "C" | |
| . | ||
| . | ||
| CXn,CYn | Ending point of subarea "C" | |
| AX1,AY1 | Starting point of area "A" (Flag Point) |
Each area's ending point must have the same coordinate as its starting point. The staring point of area "A" is used as a marker (called a Flag Point) to indicate the end of each subarea. This means the first area point's coordinate must be unique and cannot appear as a coordinate within any subarea.
And, an example of what the actual file may look like:
""pname"" ""attrib"" 13
48 99
52 20
57 19
56 8
29 0
27 71
48 99
40 70
50 60
48 55
34 40
40 70
48 99
Import Options Dialog
No import options dialog is displayed.
Import Automation Options
See Atlas Boundary BLN Import Automation Options
Export Options Dialog
See Atlas Boundary BNA Export Options Dialog
Export Automation Options
See Atlas Boundary BNA Export Automation Options